Sex Doll Guides

Sex Doll Repair Guide Restore the Beauty of Your Love Doll

Though many people use their dolls following guidance, we have to admit unexpected damage may appear sometimes. Sex doll repair sounds difficult. You may think how could it be possible to conduct a sex doll repair by yourself? Don’t worry! This guide will help you to know the potential damage and clean the obstacles on your sex doll repairing way!

Things to Know Before Repair a Sex Doll

Possible Damages and Causes Indentation

The indentations on the doll are caused by uneven surfaces or hard objects being pressed out during transportation or storage.

Swelling
The doll will pass through different regions during transportation, and the pressure difference will cause part swelling.

Puncture
Punctures are commonly found at the top of the neck and legs. Due to the vertical placement of the wrap during transportation, the skeleton punctures the neck or legs due to the influence of gravity.

Tearing
Tearing usually occurs near the orifice of a doll due to insufficient lubrication during use and excessive leg opening angle.

If you find punctures and tearing on your dolls, you should read the following instructions carefully and repair sex doll accordingly, because these two types of damage are more complex to handle than the previous two.

Sex Doll Repair Preparation

Check Your Sex Doll

Checking is the first step before sex doll repair, which means you need to know where is the wound, what your doll is made of and how to select appropriate tolls and materails for sex doll repair.

We understand that you have been eagerly anticipating the arrival of your doll for a loooooooong time! And the doll has traveled a loooooooong way to meet you. However, inappropriate placement during transportation may cause some unexpected situations. Once you sign for the doll, we recommend that you carefully unbox and inspect it with a full video recording, which will assist our staff in providing you with professional support if any issues arise.

Step 1 Clean your sex doll

Cleaning is an important part of sex doll repair because dust and oil can be removed to avoid reducing the effect of adhesive. 

For more guide about cleaning, please click here.

Step 2 Find a suitable place

Whether you have just received the doll or have been using it for a while, if you notice any damage to the doll, you need to check the damage carefully. The first step is to move it to a clean, solid surface to facilitate a thorough inspection and repair. Avoid dragging the doll to prevent causing additional harm.

Step 3 Check the wound

Now your doll has come to a safe place! You can use a mini light to examine tiny wounds that are hard to inspect with your eyes. Possible wounds include scratches, tears, indentations, punctures, and so on. 

Step 4 Know your doll’s materials

Currently, TPE and silicon are the two main materials to produce sex dolls. In LoveNestle, all sex dolls are made of premium silicone materials, providing you with an excellent experience! You should use different repair solvents depending on your doll's materials.

TPE

TPE materials belong to synthetic materials, which possess the high elasticity, strength, and resilience of rubber. However, due to the porous structure of TPE, TPE dolls are prone to dust and oil buildup, which might result in stains that are not attractive. 

Silicon

Silicone is a polymer material with good elasticity, softness, and realism. Due to its unique physical properties, silicone dolls can usually provide a more refined skin texture, making the touch closer to that of a real person. In addition, silicone dolls generally have higher durability and can withstand longer periods of use and friction. Silicon sex dolls are more durable in general, given the fact that silicon does not get hurt easily. 

At LoveNestle, we provide only premium silicon sex dolls! As we consider the daily maintenance, cleaning, and repair of a sex doll, we make a sex doll care kit that contains all the necessary tools and materials for you!

Want to know more information about the LoveNestle Sex Doll Care Kit? 

please click here. 

Sex Doll Repair Guide

The difficulty and time of sex doll repair vary depending on the degree of damage. Under good daily maintenance, the doll is rarely damaged. If there are some minor issues, don't worry either.

Are you ready to follow the instructions to repair your doll? Let’s do it!

How to repair sex doll skin

Solving indentation and swelling is simple! Follow the tips, you will get a brand-new doll!

Repair Sex Doll Indentation:

  1. Gently rub and press the depression with your hand.
  2. The silicone will automatically restore its fullness.

Repair Sex Doll Swelling:

  1. Use a thin syringe to puncture the swollen area.
  2. Extract the air from the swollen area using the syringe.

Trust me, sex doll repairing is easy if there’s only indentation or swelling! Below are some problems that could be a bit harder during sex doll repair.

If you find punctures or tearings on your doll, you may put much effort into fixing it. First, let’s prepare some necessary materials and tools!

You may need:

  • Adhesive (TPE adhesive or silicon adhesive, depending on what your doll is made of)
  • Pigments (same as the color of the area that needed to be repaired)
  • A spatula
  • Cleaning agents* (Free from alcohol)
  • A pair of gloves*

Please ensure that the material or component of tools with * will not cause damage to the doll.

It's possible for dolls to have tears and splits in their skin. Simply follow these procedures to get it fixed promptly.

  1. Always remember to wear a pair of gloves. Don't ignore this, because gloves will shield your hands from the glue.
  2. Use cleaning agents to clean damaged areas.
  3. Mix the adhesive and pigment in a 1:1 ratio and stir thoroughly.
  4. Carefully split the tears and put a little glue on both sides.
  5. Apply a thin layer of mixed adhesive evenly to the damaged area and clean any excess adhesive residue.
  6. Hold the tears pressed together for 30 seconds to allow the glue to fuse the wound.
  7. Check if the glue seals the tears. If successful, the tear should completely close and vanish from sight.
  8. For the tear to thoroughly seal and dry, let your sex doll in that position for a full day.

Is it too hard to do? Don’t worry! You can do it following this video.

Good news! You fix the damage on your doll’s surface!

How to repair sex doll orifice

There are usually two reasons for orifice tearing: insufficient lubrication inside the orifice during use or excessive opening angle of the legs. If you find damage to the orifice, just read and repair the following key points.

*The materials and tools used are the same as those for repairing skin tears or punctures.

    1. Wear gloves and locate the tear in the orifice.
    2. Use a spatula to pry open the torn area slightly.
    3. Be careful not to use too much force, otherwise it will deepen the tear!
    4. Use a spatula to apply the mixed adhesive to the damaged area. *Please apply a small amount of adhesive multiple times to repair, to avoid excessive adhesive affecting the subsequent use experience.
    5. Observe if the torn area has been glued together with your eyes.

*Please do not use the doll within 24 hours after repairing! Otherwise, the doll may fail to be repaired.

For more detailed instructions, please refer to this video.

Great! You make a big progress in sex doll repair!

How to repair sex doll skeleton

The skeleton of a doll is a complex device because it is almost completely wrapped in silicone. Therefore, skeleton is the hardest part in sex doll repair! We suggest that if your doll's frame is severely damaged, please hand it over to a professional for repair. You can contact [email protected] for support. Our sex doll repair engineer would like to offer you a professional and detailed guide to help with your sex doll repair!

At the beginning of use, the skeleton of the doll is usually a bit tight, but after a period of use, it becomes easy to pull. This is not a quality issue, but an adjustment made by the factory to ensure that the doll maintains its shape during transportation. If it is always tight, you can inject lubricating oil into it according to the following steps.

  1. Prepare detergent or lubricating oil, because they can lubricate the stiff joints.
  2. Extract the detergent or lubricating oil with a syringe.
  3. Press the doll’s thighs with fingers to locate joints.
  4. Insert the syringe into the joint area and inject detergent or lubricating oil.
  5. Move the joint after the injection is completed.

You can also refer to this video to adjust your doll’s skeleton.

However, some of the doll's skeletons are too loose to support the weight of the silicone, and in this case, the skeleton should also be repaired. Loose skeletons occur in the crotch.

You may use:

  • A pair of scissors
  • A nut wrench
  • Adhesive
  1. Cut the skin at the base of the thigh with scissors.
  2. Use your finger to identify which nut is loose.
  3. Use the nut wrench to tighten the screw clockwise to adjust the angle of the thighs.
  4. Use a spatula to apply adhesive to the cut and make it seal.
  5. Keep the doll’s thighs in the same posture and wait at least 24 hours.

You can refer to this video to tighten your doll’s skeleton!

Things to Do After Repair a Sex Doll

We recommend that you do not use the doll for 24 hours after the repair is completed, regardless of the location of the injury, skin, or origin. You can temporarily store the doll in a cool and dry place. After the doll is restored, you can refer to the following tips for daily maintenance.

How to maintain sex doll

LoveNestle promotes silicone sex dolls for a reason! Our silicone sex dolls are incredibly easy to maintain because we use exclusive silicone production techniques that make them less oily. Here are some simple maintenance tips:

  1. Apply mineral powder, baby powder, flour, or cornstarch if your sex doll becomes oily.
  2. Use a powder brush to dust off any excess powder.

Properly care for your doll if it won't be used for a long time. You should clean the doll thoroughly if you want to store it for an extended period. Make sure the doll is completely dry before applying the renewal powder.

Indentations may be caused by not being placed on a flat surface during transportation or storage. Solving indentation is very simple! As long as you gently rub the areas with indentations, our high-performance silicone can restore its integrity on its own!

During long-way transportation, some packages were placed vertically, and the skeleton may pierce the neck or legs due to gravity. If your doll only has slight punctures, you can refer to the steps to repair the damaged area. If your doll has severe punctures, please contact our team [email protected]. Our sex doll engineer would like to provide a detailed guide for sex doll repair!

Leave a Reply

Your email address will not be published. Required fields are marked *